Open SS Skid 60 LPH RO system
Representative 60 LPH Model

Open SS Skid 60 LPH

Purification Capacity
60 litres per hour
Technology
Reverse osmosis system
Application
Suitable for brackish water
Membrane
Membrella Alpha 80 GPD × 4
Pump
Echen 150 GPD × 2
Maximum Operating TDS
Below 3000 PPM
Installation
Countertop
Power Consumption
50 W
60 LPH Range Details

Practical Features Across the Category

These points summarize the practical capabilities available across the 60 LPH domestic RO range. Exact values vary by model and configuration.

  • 60 LPH output: suitable for high-use households, offices and light commercial requirements.
  • Four system formats: open SS skid, closed MS skid, classic open frame and SS automatic storage.
  • Four 80 GPD membranes: paired with two 150 GPD pumps on the representative open-skid model.
  • Below 3000 PPM operating TDS: suitable for selected brackish-water applications.
  • 100–300 V AC input: paired with 24 V DC operating voltage on the representative model.
  • Multi-stage filtration: 10-micron, 20-inch GAC, 5-micron and post-carbon filtration.
  • More than 40% recovery: measured at approximately 27°C ± 2°C.
  • Approx. 3000-litre filter life: or around six months, depending on water quality and usage.
Need Expert Guidance?

Not Sure Which 60 LPH Configuration to Select?

Share your water source, daily usage and installation requirement. Our team will recommend a suitable 60 LPH RO configuration.

Send an Enquiry